 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-20838 rev. B 01/07 MBRB20...CTG MBR20...CTG-1 SCHOTTKY RECTIFIER 20 Amp IF(AV) = 20 Amp VR = 80/100V Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform (Per Device) IFRM VRRM IFSM @ tp = 5 s sine VF TJ @ 10 Apk, TJ = 125C range @ TC = 133C (Per Leg) 20 80/ 100 850 0.70 - 65 to 150 A V A V C Description/ Features Units A This center tap Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150 C TJ operation Center tap D 2Pak and TO-262 packages Low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Values 20 Case Styles MBRB20...CTG MBR20...CTG-1 Base Common Cathode 2 Base Common Cathode 2 1 Anode 2 Common Cathode 3 Anode 1 Anode 2 Common Cathode 3 Anode D2PAK www.irf.com TO-262 1 MBRB20...CTG, MBR20...CTG-1 Bulletin PD-20838 rev. B 01/07 Voltage Ratings Parameters VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) MBRB2080CTG MBR2080CTG-1 MBRB2090CTG MBR2090CTG-1 MBRB20100CTG MBR20100CTG-1 80 90 100 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward (Per Leg) Current (Per Device) IFRM Peak Repetitive Forward Current (Per Leg) IFSM Non Repetitive Peak Surge Current IRRM Peak Repetitive Reverse Surge Current EAS Non-Repetitive Avalanche Energy (Per Leg) Values 10 20 20 850 150 0.5 24 Units A A Conditions @ T C = 133 C, (Rated VR) Rated VR, square wave, 20kHz TC = 133 C 5s Sine or 3s Following any rated load condition and with rated V RRM applied Rect. pulse Surge applied at rated load conditions halfwave, single phase, 60Hz 2.0 sec 1.0 KHz TJ = 25 C, IAS = 2 Amps, L = 12 mH A A mJ Electrical Specifications Parameters VFM Max. Forward Voltage Drop (1) Values 0.80 0.95 0.70 0.85 Units V V V V mA mA V m Conditions @ 10A @ 20A @ 10A @ 20A TJ = 25 C TJ = 125 C TJ = TJ max. TJ = 25 C TJ = 125 C Rated DC voltage IRM Max. Instantaneus Reverse Current (1) 0.10 6 0.433 15.8 400 8.0 10000 VF(TO) Threshold Voltage rt CT LS Forward Slope Resistance Max. Junction Capacitance Typical Series Inductance pF nH VR = 5VDC (test signal range 100Khz to 1Mhz) 25C Measured from top of terminal to mounting plane (1) Pulse Width < 300s, Duty Cycle <2% dv/dt Max. Voltage Rate of Change V/ s (Rated VR) Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range Values -65 to 150 -65 to 175 2.0 0.50 50 2 (0.07) Min. Max. 6 (5) 12 (10) Units C C Conditions RthJC Max. Thermal Resistance Junction to Case (Per Leg) RthCS Typical Thermal Resistance Case to Heatsink RthJA Max. Thermal Resistance Junction to Ambient wt T Approximate Weight Mounting Torque Marking Device C/W DC operation C/W Mounting surface, smooth and greased Only for TO-220 C/W DC operation For D2Pak and TO-262 g (oz.) Kg-cm Non-lubricated threads (Ibf-in) Case style D2-Pak Case style TO-262 MBRB20100CTG MBR20100CTG-1 2 www.irf.com MBRB20...CTG, MBR20...CTG-1 Bulletin PD-20838 rev. B 01/07 100 100 10 1 0.1 0.01 0.001 0.0001 TJ = 150C 125C 100C 75C 50C 25C Instantaneous Forward Current - IF (A) TJ = 150C TJ = 125C TJ = 25C 10 R everse Current - IR (mA) 0 20 40 60 80 100 R everse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 1000 Junction Cap acitance - C T (pF) TJ = 25C 100 1 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 10 0 20 40 60 80 100 Forward Voltage Drop - V FM (V) Reverse Voltage - VR (V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 10 T hermal Impedance Z thJC (C/ W) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 P DM 0.1 S ingle Pulse (T hermal Resistance) 0.01 0.00001 Notes: t1 t2 1. Duty factor D = t 1/ t 2 2. Peak T = PDM x Z thJC+ TC J 0.01 0.1 1 10 0.0001 0.001 t 1 , Rec ta ng ular Pulse Duration (S onds) ec Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 MBRB20...CTG, MBR20...CTG-1 Bulletin PD-20838 rev. B 01/07 150 Allowable Case T emperature - (C) Average Power Loss - (Watts) 10 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC R Limit MS 4 140 DC 8 130 S uare wave (D = 0.50) q R ated VR applied 6 120 110 see note (2) 2 100 0 0 2 4 6 8 10 12 14 16 0 2 4 6 8 10 12 14 16 Average Forward Current - I F(AV) (A) Average Forward Current - I F(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics (Per Leg) Non-R epetitive S urge Current - I FS (A) M 1000 At Any R ated Load Condition And With R ated VRRM Applied Following S urge 100 10 100 1000 10000 S quare Wave Pulse Duration - t p (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x I R (1 - D); IR @ VR1 = rated VR 4 www.irf.com MBRB20...CTG, MBR20...CTG-1 Bulletin PD-20838 rev. B 01/07 Outline Table Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) Modified JEDEC outline TO-262 Dimensions in millimeters and (inches) www.irf.com 5 MBRB20...CTG, MBR20...CTG-1 Bulletin PD-20838 rev. B 01/07 Tape & Reel Information Dimensions in millimeters and (inches) Part Marking Information D2PAK THIS IS A MBRB20100CTG LOT CODE 8024 ASSEMBLED ON WW 02, 2000 IN THE ASSEMBLY LINE "L" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER G = Schottky Generation MBRB20100CTG DATE CODE YEAR 0 = 2000 WEEK 02 LINE L PART NUMBER G = Schottky Generation TO-262 EXAMPLE: THIS IS A MBR20100CTG-1 LOT CODE 1789 ASSEMBLED ON WW 19, 1999 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE DATE CODE YEAR 9 = 1999 WEEK 19 LINE C 6 www.irf.com MBRB20...CTG, MBR20...CTG-1 Bulletin PD-20838 rev. B 01/07 Ordering Information Table Device Code MBR 1 1 2 3 4 5 6 7 8 - B 2 20 3 100 4 CT 5 G 6 -1 7 TRL 8 9 Essential Part Number B = D2Pak 80 = 80V 90 = 90V 100 = 100V none = TO-262 Current Rating (20 = 20A) Voltage Ratings CT = Essential Part Number G = Schottky Generation none = D2Pak -1 = TO-262 none = Tube (50 pieces) TRL = Tape & Reel (Left Oriented - for D 2Pak only) TRR = Tape & Reel (Right Oriented - for D 2Pak only) 9 - none = Standard Production PbF = Lead-Free (D 2Pak tube) P = Lead-Free (for D 2Pak TRR and TRL, and TO-262) Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 01/07 www.irf.com 7 |
Price & Availability of MBRB20100CTG-1TRL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |